1、工作服上極難清洗的霉斑

1. Mold stains on work clothes that are extremely difficult to clean

應使用35-60攝氏度的熱雙氧水溶液或者漂白粉溶液擦拭，再用水漂洗干凈。這樣可以讓你工作服上面原本難以的霉斑得以，讓你的工作服還原原來的狀態。

It should be wiped with a hot hydrogen peroxide solution or bleach solution at 35-60 degrees Celsius, and then rinsed clean with water. This can remove the mold on your work clothes that were previously difficult to remove, restoring your work clothes to their original state.

2、棉麻織品上的霉斑

2. Mold stains on cotton and linen fabrics

先用氨水20克兌1升水的稀釋液浸漬，然后用水漂洗干凈。這種霉斑的方式相對比較簡單，但是，一定要在稀釋液的比例上把握好，不然則可能達不到你想要去除霉斑的效果。

First, soak in a diluent of 20 grams of ammonia water mixed with 1 liter of water, and then rinse thoroughly with water. This method of removing mold spots is relatively simple, but it is important to control the proportion of diluent, otherwise it may not achieve the desired effect of removing mold spots.

3、絲毛織品上的霉斑

3. Mold spots on silk and wool fabrics

應使用棉球蘸松節油擦洗，再用太陽曬，去除潮氣。這種方式可以說是非常簡單的了，不過，建議大家一定要注意合理的晾曬工作服。

Cotton balls dipped in turpentine should be used to scrub, and then sun dried to remove moisture. This method can be said to be very simple, but it is recommended that everyone pay attention to reasonable drying of work clothes.

更多的關于濟南工作服的問題或者詳細的內容，請進入我們公司的網站： http://www.ytjncl.com網站中會有很多的內容僅供參考。

For more questions or detailed information about Jinan work uniforms, please visit our company website: http://www.ytjncl.com There will be a lot of content on the website for reference only.