新聞
聯系方式
服務熱線：0531-85980985
聯系人： 寧經理 手機：13953116782 電話：15990999232 郵箱：499589624@qq.com 地址：濟南市槐蔭區清河北路11號（美里新居南門斜對面）亞德森工廠店
工作服定制時的量體介紹
來源：http://www.ytjncl.com 日期：2023-01-18 發布人：
假如要進行濟南工作服定制，自然就免不了量身，量身的精確性，才可以決定工作服的舒適感，那要怎樣量身呢？濟南工裝定做廠家為您解答。
If you want to customize the Jinan work clothes, it is inevitable to measure them. The accuracy of the measurement can determine the comfort of the work clothes. How do you measure them? Jinan tooling manufacturer will answer for you.
1.整體高：代表服裝“號”，由腦部端點豎直量腳根。
1. Overall height: represents the "size" of clothing, measured vertically from the end of the brain to the foot.
2.衣長：由前身左邊脖根處，通過胸口高處，量對需長度，通常量手的虎口。
2. Length: Measure the required length from the left neck root of the front body to the height of the chest, usually to the mouth of the hand.
3.胸圍尺寸：代表上衣類服裝“型”，在襯衣外，沿腋窩下，通過胸部豐滿處，平衡圍量一周，按需
3. Bust size: it represents the "shape" of blouse clothing. It is outside the shirt, under the armpit, through the full chest, balancing the circumference for one week, as required
4.肩膀寬：由背部左肩骨外端端點量右肩骨外端端點（軟尺在背部中間緊貼后脖根略成弧形）。樣式需要夸張時，肩可適度放松。燈籠袖款可適度改窄。
4. Shoulder width: measure from the outer end of the left shoulder bone on the back to the outer end of the right shoulder bone (the soft ruler is slightly curved in the middle of the back against the back neck root). When the style needs exaggeration, the shoulders can be moderately relaxed. Lantern sleeves can be moderately narrowed.
5.袖長：由左肩骨外端端點量手的虎口，按需要調整長度。
5. Sleeve length: measure from the outer end of the left shoulder bone to the mouth of the hand, and adjust the length as needed.
6.衣袖：圍量手腕一周，再按需要加放尺寸還可依據樣式的不同用胸圍尺寸比率法測算。
6. Sleeves: Measure the wrist for one week, and then add the size according to the need. It can also be measured by the chest size ratio method according to the different styles.
7.領大：沿喉骨下圍量一周，按需要加放尺寸。
7. Large collar: measure one week along the lower circumference of the throat bone, and add dimensions as needed.
8.腰節：通常體形可按整體高算出。碰到特殊體形時，就需要量取前后的腰節尺寸（在腹部較細處，圍一條皮尺成水平），分別量取前后腰節的尺寸。
8. Waist joint: generally, the figure can be calculated according to the overall height. When encountering a special body shape, you need to measure the size of the front and rear lumbar joints (at the thinner part of the abdomen, put a tape measure horizontally), and measure the size of the front and rear lumbar joints respectively.
9.褲子尺碼：由腹部左邊胯骨上方，往上4厘米向下量腳后跟減3厘米。
9. Pant size: measure from the upper part of the left hip bone of the abdomen up to 4 cm and down to the heel minus 3 cm.
10.腰圍：代表褲子類服裝“型”。在單褲邊側腰間較細處圍量一周，按需要加放尺寸。
10. Waist: represents the "shape" of pants. Measure around the thinner part of the waist at the side of the single pants, and increase the size as needed.
11.臀圍：沿臀部飽滿處平衡圍量一周，按需要加放松度。
11. Hip circumference: balance the circumference around the full part of the hip for one week, and increase the degree of relaxation as required.
12.上襠：由腹部右邊胯骨上方，往上4厘米，量大腿根。
12. Upper crotch: from the upper part of the right crotch of the abdomen, measure up to the thigh root by 4cm.
工作服定制時的量體介紹就從十二個方面來講解完畢了，對此您有什么想法呢？可以隨時來我們網站http://www.ytjncl.com留言咨詢！
The customization of work clothes has been explained from 12 aspects. What do you think of this? You can come to our website at any time http://www.ytjncl.com Message consultation!
上一條：工作服制作中對于裁剪工藝有什么要求？ | 下一條：到底工作服更適合與哪一種方法呢？
資訊MORE+
- 濟南定制西裝制服職業裝，不可不知的注意事項 2025-09-19
- 濟南工裝定做：工裝定做的流程 2025-09-18
- 濟南工作服：工作服的設計不僅僅是舒服這么簡單！ 2025-09-17
- 濟南工裝定做：穿的整齊，人心才能齊！ 2025-09-16
- 濟南職業裝：職業裝搭配好了也能穿出時髦范兒 2025-09-13
- 濟南工作服：保安工作服管理辦法 2025-09-08
- 濟南工作服：企業定制員工工作服需要關注的四大 2025-08-30
- 濟南工作服定做：選對工裝工作效率翻倍 2025-08-24
- 濟南工作服定制：定制襯衫工作服驗收不再難 2025-08-23
- 工作服不合規？污染難控制?濟南工作服廠家亞美森為您解決 2025-08-09
- 濟南各行業工作服重量解析 2025-07-30
- 濟南服裝廠常用機械解析 2025-07-28
- 濟南工作服設計：行業風格的差異化體現 2025-07-25
- 濟南工作服開口大小設計方法：兼顧實用與地域適配性 2025-07-24
- 定制濟南工作服的時候要在意哪些問題？ 2025-07-23
- 濟南工作服設計需關注的核心要點 2025-07-22
- 濟南服裝廠夏季工作服：舒適面料 2025-07-21
- 濟南工作服定制廠家優勢解析 2025-07-18
- 濟南工作服制作流程要怎么實行？ 2025-07-16
- 濟南服裝廠定制有什么優勢？ 2025-07-14
